SÜRDÜRÜLEBİLİR ÜRETİM VE TÜRKİYE’DE UYGULAMA ÖRNEKLERİ

Alperen Mustafa YİĞİT

doi:10.5281/zenodo.18044530

Yazarlar

Alperen Mustafa YİĞİT Ordu Üniversitesi https://orcid.org/0000-0002-4141-2621

DOI:

https://doi.org/10.5281/zenodo.18044530

Anahtar Kelimeler:

Sürdürülebilir Kalkınma Amaçları, Sorumlu Üretim, Sorumlu Tüketim

Özet

Sürdürülebilir kalkınma ve sürdürülebilir üretim; yalnızca çevresel tahribatı azaltmaya yönelik bir refleks değildir. Aynı zamanda küresel ekonominin uzun vadeli dayanıklılığını sağlayan temel bir paradigma değişimidir. Bu çalışmada sürdürülebilir üretimin ilkeleri, boyutları, süreçleri üzerinde durulmuş ve zorluklar ele alınmıştır. Çalışmanın çerçevesini Birleşmiş Milletlerin toplam 17 başlıkta ele aldığı Sürdürülebilir Kalkınma Amaçlarından 12. Amaç olan Sorumlu Üretim ve Tüketim amacı oluşturmaktadır. Bu amaç altındaki hedefler ve Türkiye’de bu hedeflere yönelik konu ile ilgili faaliyetlerde bulunmuş olan işletmelerin uygulama örnekleri incelenmiştir. Yapılan uygulamalar toplu olarak değerlendirildiğinde Şirketlerin sürdürülebilirlik bilgilerini raporlama döngülerine entegre etmeyi teşvik eden SKA 12.6, Türkiye’nin en güçlü olduğu alanlardan biri olduğu görülmektedir. Bunun yanı sıra Döngüsel Ekonomi ve Atık Yönetimi (SKA 12.4 ve 12.5) ve Turizmde Sürdürülebilirlik (SKA 12.b) konularında ciddi adımlar atıldığı tespit edilmiştir.

Referanslar

Álvarez Jaramillo, J., Zartha Sossa, J. W., & Orozco Mendoza, G. L. (2018). Barriers to sustainability for small and medium enterprises in the framework of sustainable development. https://onlinelibrary.wiley.com/doi/10.1002/bse.2261

Appleby, M. R., Buckley, A. B., Lambert, C., & Rennie, A. (2010). A Comparison of Carbon Footprint Calculations for End of Life Product Recovery Methods Using PAS 2050. https://doi.org/10.1115/esda2010-24726

Arena, M., Ciceri, N. D., Terzi, S., Bengo, I., Azzone, G., & Garetti, M. (2009). A state-of-the-art of industrial sustainability: definitions, tools and metrics. In International Journal of Product Lifecycle Management (Vol. 4, Issue 1, p. 207). Inderscience Publishers. https://doi.org/10.1504/ijplm.2009.031674

Awasthi, A., Saxena, K. K., & Arun, V. (2020). Sustainability and survivability in manufacturing sector. In Elsevier eBooks (p. 205). Elsevier BV. https://doi.org/10.1016/b978-0-12-819496-6.00011-7

Benedetti, M., Cesarotti, V., & Introna, V. (2015). Improving Energy Efficiency in Manufacturing Systems — Literature Review and Analysis of the Impact on the Energy Network of Consolidated Practices and Upcoming Opportunities. In InTech eBooks. https://doi.org/10.5772/59820

Bhanot, N., Rao, P. V., & Deshmukh, S. G. (2015). Enablers and Barriers of Sustainable Manufacturing: Results from a Survey of Researchers and Industry Professionals. In Procedia CIRP (Vol. 29, p. 562). Elsevier BV. https://doi.org/10.1016/j.procir.2015.01.036

Bogue, R. (2014). Sustainable manufacturing: a critical discipline for the twenty-first century. In Assembly Automation (Vol. 34, Issue 2, p. 117). Emerald Publishing Limited. https://doi.org/10.1108/aa-01-2014-012

Bonilla, S. H., Silva, H. R. O., Silva, M. T. da, Gonçalves, R. F., & Sacomano, J. B. (2018). Industry 4.0 and Sustainability Implications: A Scenario-Based Analysis of the Impacts and Challenges. https://www.mdpi.com/2071-1050/10/10/3740/pdf

C., J. L. D., & Ocampo‐Martínez, C. (2019). Energy efficiency in discrete-manufacturing systems: Insights, trends, and control strategies. In Journal of Manufacturing Systems (Vol. 52, p. 131). Elsevier BV. https://doi.org/10.1016/j.jmsy.2019.05.002

Ching, N. T., Ghobakhloo, M., Iranmanesh, M., Maroufkhani, P., & Asadi, S. (2022). Industry 4.0 applications for sustainable manufacturing: A systematic literature review and a roadmap to sustainable development.

Despeisse, M., & Ford, S. (2015). The Role of Additive Manufacturing in Improving Resource Efficiency and Sustainability. In IFIP advances in information and communication technology (p. 129). Springer Science+Business Media. https://doi.org/10.1007/978-3-319-22759-7_15

Diana, H., & Harahap, I. (2023). The ımplementatıon of maslahah mursalah ın the cırcular economy of waste of ukm tempe berkah ın hamparan perak vıllage. In istinbath (Vol. 22, Issue 1, p. 21). https://doi.org/10.20414/ijhi.v22i1.581

Dornfeld, D. (2014). Moving towards green and sustainable manufacturing. In International Journal of Precision Engineering and Manufacturing-Green Technology (Vol. 1, Issue 1, p. 63). Springer Science+Business Media. https://doi.org/10.1007/s40684-014-0010-7

Enyoghasi, C., & Badurdeen, F. (2021). Industry 4.0 for sustainable manufacturing: Opportunities at the product, process, and system levels.

Fiksel, J. (2002). Sustainable Development through Industrial Ecology. https://pubs.acs.org/doi/abs/10.1021/bk-2002-0823.ch002

Gallo, M., Romano, E., & Carmela, L. (2012). A Perspective on Remanufacturing Business: Issues and Opportunities. In InTech eBooks. https://doi.org/10.5772/48103

Garetti, M., & Taisch, M. (2011). Sustainable manufacturing: trends and research challenges. In Production Planning & Control (Vol. 23, Issue 2, p. 83). Taylor & Francis. https://doi.org/10.1080/09537287.2011.591619

Haapala, K. R., Zhao, F., Camelio, J. A., Sutherland, J. W., Skerlos, S. J., Dornfeld, D., Jawahir, I. S., Clarens, A. F., & Rickli, J. L. (2013). A Review of Engineering Research in Sustainable Manufacturing [Review of A Review of Engineering Research in Sustainable Manufacturing]. Journal of Manufacturing Science and Engineering, 135(4). ASM International. https://doi.org/10.1115/1.4024040

Hickle, G., & Stitzhal, D. (2003). Apportioning the responsibilities for product stewardship: A case for a new federal role. In Environmental Quality Management (Vol. 12, Issue 3, p. 1). Wiley. https://doi.org/10.1002/tqem.10070

Huang, S. H., Liu, P., Mokasdar, A., & Hou, L. (2012). Additive manufacturing and its societal impact: a literature review [Review of Additive manufacturing and its societal impact: a literature review]. The International Journal of Advanced Manufacturing Technology, 67(5), 1191. Springer Science+Business Media. https://doi.org/10.1007/s00170-012-4558-5

Ishola, B. (2019). Handling Waste in Manufacturing: Encouraging Re-Manufacturing, Recycling and Re-Using in United States of America. In Procedia Manufacturing (Vol. 39, p. 721). Elsevier BV. https://doi.org/10.1016/j.promfg.2020.01.444

Jacques, J. J. de, Agogino, A. M., & Guimarães , L. B. M. (2010). Sustainable Product Development Initiatives in the Footwear Industry Based on the Cradle to Cradle Concept (p. 473). https://doi.org/10.1115/detc2010-29061

Joung, C. B., Carrell, J., Sarkar, P., & Feng, S. C. (2012). Categorization of indicators for sustainable manufacturing. In Ecological Indicators (Vol. 24, p. 148). Elsevier BV. https://doi.org/10.1016/j.ecolind.2012.05.030

Kohl, H., Schliephack, W., & Bonvoisin, J. (2020). Increasing challenges for sustainability for manufacturing industry based on global, national and technological initiatives. In Procedia Manufacturing (Vol. 43, p. 293). Elsevier BV. https://doi.org/10.1016/j.promfg.2020.02.160

Labella-Fernández, A., Serrano‐Arcos, M. M., & Payán‐Sánchez, B. (2021). Firm Growth as a Driver of Sustainable Product Innovation: Mediation and Moderation Analysis. Evidence from Manufacturing Firms. In International Journal of Environmental Research and Public Health (Vol. 18, Issue 5, p. 2588). Multidisciplinary Digital Publishing Institute. https://doi.org/10.3390/ijerph18052588

Latif, H., Gopalakrishnan, B., Nimbarte, A. D., & Currie, K. R. (2017). Sustainability index development for manufacturing industry. In Sustainable Energy Technologies and Assessments (Vol. 24, p. 82). Elsevier BV. https://doi.org/10.1016/j.seta.2017.01.010

Li, A. Q., & Found, P. (2017). Towards Sustainability: PSS, Digital Technology and Value Co-creation. In Procedia CIRP (Vol. 64, p. 79). Elsevier BV. https://doi.org/10.1016/j.procir.2017.05.002

Narayanan, R. G., & Gunasekera, J. S. (2023). Sustainable Manufacturing Processes. Academic Press.

O’Rourke, J. M., & Seepersad, C. C. (2011). A Methodology for Identifying Factors That Contribute to the Sustainability of Bioinspired Engineered Systems. https://doi.org/10.1115/imece2011-62605

Rosen, M. A., & Kishawy, H. A. (2012). Sustainable Manufacturing and Design: Concepts, Practices and Needs. In Sustainability (Vol. 4, Issue 2, p. 154). Multidisciplinary Digital Publishing Institute. https://doi.org/10.3390/su4020154

Roy, S., Das, M., Ali, S. M., Raihan, A. S., Paul, S. K., & Kabir, G. (2020). Evaluating strategies for environmental sustainability in a supply chain of an emerging economy. In Journal of Cleaner Production (Vol. 262, p. 121389). Elsevier BV. https://doi.org/10.1016/j.jclepro.2020.121389

Sahar, D. P., Afifudin, M. T., & Indah, A. B. R. (2020). Review of green supply chain management in manufacturing: A case study. In IOP Conference Series Earth and Environmental Science (Vol. 575, Issue 1, p. 12239). IOP Publishing. https://doi.org/10.1088/1755-1315/575/1/012239

San-José, J. T., Garrucho, I., Losada, R., & Cuadrado, J. (2007). A proposal for environmental indicators towards industrial building sustainable assessment. In International Journal of Sustainable Development & World Ecology (Vol. 14, Issue 2, p. 160). Taylor & Francis. https://doi.org/10.1080/13504500709469716

Sangwan, K. S., Choudhary, K., & Batra, C. (2017). Environmental impact assessment of a ceramic tile supply chain – a case study. In International Journal of Sustainable Engineering (Vol. 11, Issue 3, p. 211). Taylor & Francis. https://doi.org/10.1080/19397038.2017.1394398

Sarkar, P., Joung, C. B., Carrell, J., & Feng, S. C. (2011). Sustainable Manufacturing Indicator Repository. https://doi.org/10.1115/detc2011-47491

Sartal, A., Bellas, R., Mejías, A. M., & García-Collado, A. (2020). The sustainable manufacturing concept, evolution and opportunities within Industry 4.0: A literature review. https://journals.sagepub.com/doi/10.1177/1687814020925232

Saxena, P., Stavropoulos, P., Kechagias, J. D., & Salonitis, K. (2020). Sustainability Assessment for Manufacturing Operations. In Energies (Vol. 13, Issue 11, p. 2730). Multidisciplinary Digital Publishing Institute. https://doi.org/10.3390/en13112730

Schmid, S. (2012). Energy consumption in manufacturing. In AIP conference proceedings. American Institute of Physics. https://doi.org/10.1063/1.4707591

Sembiring, N., Tambunan, M., & Ginting, E. (2020). Sustainable Manufacturing that is Environmentally Friendly. In Journal of Physics Conference Series (Vol. 1542, Issue 1, p. 12004). IOP Publishing. https://doi.org/10.1088/1742-6596/1542/1/012004

Solikhah, B., Wahyuningrum, I. F. S., Yulianto, A., Sarwono, E., & Widiatami, A. K. (2021). Carbon emission report: a review based on environmental performance, company age and corporate governance [Review of Carbon emission report: a review based on environmental performance, company age and corporate governance]. IOP Conference Series Earth and Environmental Science, 623(1), 12042. IOP Publishing. https://doi.org/10.1088/1755-1315/623/1/012042

Umeda, Y., Takata, S., Kimura, F., Tomiyama, T., Sutherland, J. W., Kara, S., Herrmann, C., & Duflou, J. R. (2012). Toward integrated product and process life cycle planning—An environmental perspective. In CIRP Annals (Vol. 61, Issue 2, p. 681). Elsevier BV. https://doi.org/10.1016/j.cirp.2012.05.004

Linkler

https://sustainability.sisecam.com/sites/catalogs/tr/Documents/surdurulebilirlik-raporlari/sisecamsurdurulebilirlik2023.pdf (Erişim Tarihi: 18.11.2025)

https://www.tupras.com.tr/tr/basin-bultenleri/tupras-bes-yilda-11-milyon-kisinin-yillik-su-tuketimine-esdeger-su-tasarruf-etti (Erişim Tarihi: 17.11.2025)

https://sustainability.mavi.biz/collections (Erişim Tarihi: 15.11.2025)

https://www.aa.com.tr/tr/isdunyasi/otomotiv/ford-otosandan-fous-projesiyle-atik-bataryalara-ikinci-hayat/688171 (Erişim Tarihi: 16.11.2025)

https://www.enerjisauretim.com.tr/surdurulebilirlik-odagimiz/ (Erişim Tarihi: 16.11.2025)

https://www.vakko.com/surdurulebilir-gelecek (Erişim Tarihi: 18.11.2025)

https://www.icdas.com.tr/pages/2716/2716/f/tr-TR/Surdurulebilirlik.aspx (Erişim Tarihi: 12.11.2025)

https://www.migroskurumsal.com/surdurulebilirlikfiles/pdf/2024_gida-israfini-onleme-calismalarimiz.pdf (Erişim Tarihi: 19.11.2025)

https://www.metro-tr.com/surdurulebilirlik-platformu (Erişim Tarihi: 10.11.2025)

https://kurumsal.sokmarket.com.tr/uploads/20250912165846301.pdf (Erişim Tarihi: 20.11.2025)

https://www.thebrandplanet.com/unilever-2039da-net-sifir-emisyon-hedefini-acikladi/ (Erişim Tarihi: 21.11.2025)